Builder master Build #74
Results:
Build successful
SourceStamp:
| Repository | https://github.com/NASA-Tensegrity-Robotics-Toolkit/NTRTsim |
| Branch | master |
| Revision | 88c81632cb097be19ff0da421ebdf24f2be4f759 |
| Got Revision | 88c81632cb097be19ff0da421ebdf24f2be4f759 |
| Changes | 1 change |
BuildSlave:
nix-slaveReason:
scheduler
Steps and Logfiles:
-
git update ( 2 secs )
-
Preload build with Boost and Bullet '/home/bbadmin/buildbot/slave/master/build/bin/setup/buildbot/buildPreload.sh' ( 15 secs )
-
Generate conf files './setup.sh' ( 0 secs )
-
Run setup.sh './setup.sh' ( 16 secs )
-
Build src './bin/build.sh' ( 41 secs )
-
Build and run tests '/home/bbadmin/buildbot/slave/master/build/bin/setup/buildbot/buildRunTests.sh' ( 0 secs )
-
Delivers successful builds '/home/bbadmin/buildbot/slave/master/build/bin/setup/buildbot/deliverBuild.sh' ( 5 secs )
Build Properties:
| Name | Value | Source |
|---|---|---|
| branch | master | Build |
| builddir | /home/bbadmin/buildbot/slave/master | slave |
| buildername | master | Builder |
| buildnumber | 74 | Build |
| codebase | Build | |
| got_revision | 88c81632cb097be19ff0da421ebdf24f2be4f759 | Git |
| project | Build | |
| repository | https://github.com/NASA-Tensegrity-Robotics-Toolkit/NTRTsim | Build |
| revision | 88c81632cb097be19ff0da421ebdf24f2be4f759 | Build |
| scheduler | all | Scheduler |
| slavename | nix-slave | BuildSlave |
| workdir | /home/bbadmin/buildbot/slave/master | slave (deprecated) |
Forced Build Properties:
| Name | Label | Value |
|---|
Responsible Users:
- Steve Lessardsr.lessard@gmail.com
Timing:
| Start | Mon Sep 15 18:21:28 2014 |
| End | Mon Sep 15 18:22:49 2014 |
| Elapsed | 1 mins, 21 secs |
All Changes:
:
Change #98
Category None Changed by Steve Lessard <sr.lessard@gmail.com> Changed at Mon 15 Sep 2014 18:18:44 Repository https://github.com/NASA-Tensegrity-Robotics-Toolkit/NTRTsim Branch master Revision 88c81632cb097be19ff0da421ebdf24f2be4f759 Comments
Added python script that prints first value of every trial
Changed files
- src/dev/steve/Escape_T6/logs/printDistances.py