Builder master Build #448

Results:

Build successful

SourceStamp:

BuildSlave:

Reason:

scheduler

Steps and Logfiles:

1. git update ( 3 secs )
   1. stdio
2. Preload build with Boost and Bullet '/home/bbadmin/buildbot/slave/master/build/bin/setup/buildbot/buildPreload.sh' ( 8 secs )
   1. stdio
3. Generate conf files './setup.sh' ( 0 secs )
   1. stdio
4. Run setup.sh './setup.sh' ( 1 mins, 48 secs )
   1. stdio
5. Build src './bin/build.sh' ( 2 mins, 35 secs )
   1. stdio
6. Build and run tests '/home/bbadmin/buildbot/slave/master/build/bin/setup/buildbot/buildRunTests.sh' ( 44 secs )
   1. stdio
7. Delivers successful builds '/home/bbadmin/buildbot/slave/master/build/bin/setup/buildbot/deliverBuild.sh' ( 42 secs )
   1. stdio

Build Properties:

Forced Build Properties:

Responsible Users:

1. Edward Zhu

   zhu.edward445ohnoyoudont@gmail.com

Timing:

All Changes:

:

1. Change #1204

   Category	None
   Changed by	Edward Zhu <zhu.edward445ohnoyoudont@gmail.com>
   Changed at	Fri 17 Jun 2016 17:28:11
   Repository	https://github.com/NASA-Tensegrity-Robotics-Toolkit/NTRTsim
   Branch	master
   Revision	7ff9cfef180dc8a289d25fd364bd590167be2e4e

   Comments

   Merge branch 'master' of https://github.com/NASA-Tensegrity-Robotics-Toolkit/NTRTsim

   Changed files

   • no files

2. Change #1205

   Category	None
   Changed by	Edward Zhu <zhu.edward445ohnoyoudont@gmail.com>
   Changed at	Fri 17 Jun 2016 17:32:39
   Repository	https://github.com/NASA-Tensegrity-Robotics-Toolkit/NTRTsim
   Branch	master
   Revision	a810f1d35d3a5ca718b48c063a17f5f9c3a8859f

   Comments

   Update the STL parser README formatting

   Changed files

   • src/dev/ezhu/STLParser/README.md

3. Change #1206

   Category	None
   Changed by	Edward Zhu <zhu.edward445ohnoyoudont@gmail.com>
   Changed at	Fri 17 Jun 2016 17:34:10
   Repository	https://github.com/NASA-Tensegrity-Robotics-Toolkit/NTRTsim
   Branch	master
   Revision	86b6e244c8988137eee05f256a42a645de48b484

   Comments

   Update the STL parser README formatting again

   Changed files

   • src/dev/ezhu/STLParser/README.md